Clamping Elements for
Round Rods and Shafts
- High rigidity
- Virtually wear-free
Linear Technology
Strong Clamping in a Compact Form
The KONSTANDIN clamping solution delivers maximum clamping force for linear movements directly on shafts or round rods, while offering lower system costs compared to hydraulic or electric alternatives.
The large stroke of KONSTANDIN
clamping elements provides a decisive advantage!
3 mm clamping stroke (both sides)
Directly during assembly, offset and tolerance compensation is possible.
Four pressure points guarantee a secure clamping process through optimal force distribution.
Option: Stainless steel version
Pneumatic
Clamping
Article Number ZS4000
Type KLW-P-040-0003
TECHNICAL DATA
| Shaft: | Ø40 mm |
| Clamping stroke: | 3 mm (both sides) |
| Clamping force (at 6 bar): |
2750 N |
| Operating pressure: | 6 bar |
| Operating pressure: | 10 bar |
| Design: | single-acting |
| Clamping: | pneumatic |
| Default position: | NO – normally open |
| Piston rod: | 2 pieces (both sides) |
| Housing: | Anodized aluminum |
| Connection: | M5 |
| Temperature range: | -20°C to +80°C |
| Medium temperature (max.): | +80°C |
Article Number ZS4004
Type KLW-P-030-0003
TECHNICAL DATA
| Shaft: | Ø30 mm |
| Clamping stroke: | 3 mm (both sides) |
| Clamping force (at 6 bar): |
1900 N |
| Operating pressure: | 6 bar |
| Pmax: | 10 bar |
| Design: | single-acting |
| Clamping: | pneumatic |
| Default position: | NO – normally open |
| Piston rod: | 2 pieces (both sides) |
| Housing: | Anodized aluminum |
| Connection: | M5 |
| Temperature range: | -20°C to +80°C |
| Medium temperature (max.): | +80°C |
Clamping by
spring preload
The clamping element closes in the pressureless state.
This makes it ideal for use as a static clamp, as it closes without any energy supply.
Compressed air opens the element and thus releases the clamping force.
Article Number ZS4002
Type KLW-F-040-0003
TECHNICAL DATA
| Shaft: | Ø40 mm |
| Clamping stroke: | 3 mm (both sides) |
| Claping force (spring preload): | 1900 N |
| Operating pressure: | 6 bar |
| Pmax: | 10 bar |
| Design: | single-acting |
| Clamping: | Clamping by spring preload |
| Default position: | NC – normally closed |
| Piston rod: | 2 pieces (both sides) |
| Housing: | Anodized aluminum |
| Connection: | M5 |
| Temperature range: | -20°C to +80°C |
| Medium temperature (max.): | +80°C |
Article Number ZS4005
Type KLW-F-030-0003
TECHNICAL DATA
| Shaft: | Ø30 mm |
| Clamping stroke: | 3 mm (both sides) |
| Clamping force (spring preload): | 1120 N |
| Operating pressure: | 6 bar |
| Pmax: | 10 bar |
| Design: | single-acting |
| Clamping: | Clamping by spring preload |
| Default position: | NC – normally closed |
| Piston rod: | 2 pieces (both sides) |
| Housing: | Anodized aluminum |
| Connection: | M5 |
| Temperature range: | -20°C to +80°C |
| Medium temperature (max.): | +80°C |