Pressure regulator / flange pressure regulator
KONSTANDIN supplies pressure regulators in the standard design, usually in combination as a component of an mainenance unit.
We also produce special pressure regulators in different sizes for our customers, which are usually used on our compact „Pneumatic Chip“ controller.
Here these controllers are mounted as a flange adaptation or completely integrated into the unit.
Another option is series-flange adaptation, where any number of blocks can be strung together and operated as a unit.
Flange pressure regulator
| Design: | Spring-controlled pressure control valve with secondary ventilation and primary pressure compensation, Handwheel fixation locking |
| Medium: | Compressed air, filtered |
| Pressure: | 0-10 bar |
| Medium temperature: |
0°C / +50°C |
| Ambient temperature: |
0°C / +50°C |
| Installation position: |
any |
| Connection: | Flange > corresponds G1/4″ |
| Flow: | 530 l/min (with 10 bar) |
| Hysteresis: | 0,5 bar (Special version with < 0,3 bar possible) |
| Particularities: | – pressure gauge connection optinal – Flange version or integrated in Pneumatic chip |
Miniature pressure regulator block
| Design: | piston pressure control valve with secondary ventilation and connection block |
| Medium: | compressed air, filtered |
| Pressure: | 0-10 bar |
| Medium temperature: |
0°C / +50°C |
| Ambient temperature: |
0°C / +50°C |
| Installation position: | any |
| Connection: | G1/8″ (P) and flange (as a series) |
| Flow: | 235 l/min (at 10 bar) |
| Hysteresis: | 0,3 bar |
| Features: | All variants can be implemented with the same block! – pressure gauge connection optional – Single Block – Flange version (Row) – integrated into Pneumatic chip |