Valves and accessories
Our range of valves includes all versions of standard valves from our partners as well as all versions of standard valves from our own production, e.g. levers in different designs, tappets, rollers, etc.
We also develop special valves for a wide variety of uses, e.g. for lifting platforms, in the outdoor area for use on silo vehicles or valves for sports weapons.
-
Hand lever valve
-
Plunger valve
-
Roller valve
All switching positions, external dimensions and actuation possible according
to customer requirements.
G1/4″
max. 10 bar
Druckluft
0°C / 60°C
Betätigung: kurzer Hebel
G1/8″
max. 10 bar
Druckluft
0°C / 60°C
Betätigung: Stößel
G1/8″, G 1/4″, G 3/8″, G 1/2″
1,5 bar / 10 bar
Druckluft
-20°C / 80°C
Betätigung: pneumatisch
Anzahl Anschlüsse: | 4, 6 und 8 |
Anschlussgrößen: | für 4er und 6er Schlauch |
Allgemein: | Lieferung inkl. Schnellsteckanschlüsse |
Material: | Aluminium |

Allgemein: | – Verteilung für max. 10 Ventile – G 1/8″ – G 1/4″ |
zusätzlich erhältlich: | – Haltewinkel – Hohlschrauben – Hohlschrauben mit Drosselfunktion |
Material: | Aluminium |
Pressure regulator
Pressure regulators are available from KONSTANDIN in standard design, mostly in combination as a component of a maintenance unit.
We also produce special pressure regulators in various sizes for our customers, which are usually used on our compact “pneumatic chip” control.
Here these controllers are mounted as flange adaptations or also completely integrated into the unit.
Another option is the row flange adaptation, where any number of blocks can be lined up and operated as a unit.
Bauart: | federgesteuertes Druckregelventil mit Sekundärentlüftung und Primärdruckkompensation, Handradfixierung rastend |
Medium: | Druckluft, gefiltert |
Druck: | 0-10 bar |
Mediums-Temperatur: | 0°C / +50°C |
Umgebungs-Temperatur: | 0°C / +50°C |
Einbaulage: | beliebig |
Anschluss: | Flansch > entspricht G1/4″ |
Durchfluss: | 530 l/min (bei 10 bar) |
Hysterese: | 0,5 bar (Sonderausführung mit < 0,3 bar möglich) |
Besonderheiten: | – Manometeranschluss wahlweise – Flanschausführung oder integriert in Pneumatic chip |
Bauart: | Kolben-Druckregelventil mit Sekundärentlüftung und Anschlussblock |
Medium: | Druckluft, gefiltert |
Druck: | 0-10 bar |
Mediums-Temperatur: | 0°C / +50°C |
Umgebungs-Temperatur: | 0°C / +50°C |
Einbaulage: | beliebig |
Anschluss: | G1/8″ (P) und Flansch (als Reihe) |
Durchfluss: | 235 l/min (bei 10 bar) |
Hysterese: | 0,3 bar |
Besonderheiten: | Alle Varianten mit dem selben Block realisierbar! – Manometeranschluss wahlweise – Block einzeln – Flanschausführung (Reihe) – integriert in Pneumatic chip |